How To Extend the Longevity of Heavy Machinery

How To Extend the Longevity of Heavy Machinery
  • Opening Intro -

    No matter which sector of the industrial field your company is in, there is a good chance you use heavy machinery every day.

    Since your business revolves around heavy usage of this type of equipment, there’s a good chance you have one or two that have seen better days.

-------------------------------------

While this problem is inevitable, that doesn’t mean you can’t do something about it.

Here are some tips on how to extend the longevity of heavy machinery that you might want to check out.

Set Up Regular Maintenance Checks

The best way to stop a problem from happening is to catch it in the early stages. There are usually key signs that something has gone wrong before the entire thing breaks down.

Typically, the culprit is a malfunctioning or broken part. Be sure to buy a high-quality industrial engine part to replace the old one to ensure it will last awhile.

Clean the Machines Often

Typically, parts break because of dirt and grime buildup or an improper amount of lubricant in between the machine’s moving parts. That’s why you need to clean them properly after heavy usage.

Your factory or job site most likely isn’t the cleanliest of places due to the nature of your business, so you must do your best to keep the muck out of your machines. A thorough cleaning every so often should do the trick.

Plus, if you follow that up with some new lubricant, you’ll notice an increase in your machine’s longevity. Just be sure not to use too much, though, because that can be just as bad as not enough.

Don’t Overload the Machines

While there will be times when you need to push your heavy machinery to its limits, you should never do that on a consistent basis. The machines will more quickly overheat and break if they’re always at full capacity.

That’s why manufacturers recommend not going over a certain pressure or temperature limit with them.

Ensure Employees Are Using Them Properly

The final area to check when trying to extend your heavy machinery’s longevity is to watch how your employees treat the equipment. If you only have a few isolated incidents of them mistreating it, a simple reprimand might be all you need.

However, if a large majority of your workforce seems to misuse your machines, there might be a more significant problem afoot. Your initial training might not have been extensive enough for your employees to comprehend the best practices for the machine they regularly use.

other related articles of interest:

If that’s the case, you might need to establish better training sessions for new employees and a few retraining ones for older workers at your factory.

As long as you do all these steps, you should notice a significant improvement in your machines’ longevity, which will benefit you and everyone else at your company in the long run.

Image Credit: by Adobe Stock royalty-free image #81553802

end of post … please share it!

-------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------

directory photos forms guide

Helpful article? Leave us a quick comment below.
And please share this article within your social networks.

twitter facebook google+ pinterest

About Author